‑6‑
Installation
● Installation must be carried out by the specialists who have received the necessary
electrical training and understood enough electrical knowledge. Ensure no
unprofessional person has access to the equipment.
● Read through the guide and safety instructions before installation.
● Do not install this equipment in places with strong electric or magnetic fields.
● Before installation, ensure that the installation position has sufficient mechanical
strength to support the weight of the device. Failure to comply will result in a mechanical
danger.
● To avoid electric shock, do not wear loose clothes or accessories.
● When this equipment is installed in a cabinet or final equipment, use a cooling device
(such as a fan or air conditioner) to cool the environment down to the required
temperature. Failure to comply may result in equipment over‑temperature or a fire.
● Do not retrofit this equipment.
● Do not fiddle with the bolts used to fix equipment components or the bolts marked in
red.
● When this product is installed in a cabinet or terminal device, protection measures such
as a fireproof enclosure, an electrical enclosure, or a mechanical enclosure must be
provided. The IP rating must meet IEC standards and local laws and regulations.
● Before installing devices with strong electromagnetic interference, such as a transformer,
install a shielding device for the equipment to prevent malfunction.
● Install the equipment onto flame retardant materials, such as metal. Keep the equipment
away from combustible objects. Failure to comply will result in a fire.
To Next Page
Loading...
Need help?
General
