Key Name Function Description
ENT
Enter
1) In the menu with cursor line, press this key to
enter the lower level menu of cursor line or
browse the information of selected parameter.
2) In parameter editing status, press this key to
validate the edited parameter, that is, save and
then escape the editing of this parameter and
start editing the next parameter.
3) In default screen, press this key to silence the
audible alarm if there is an alarm or alarm.
4.2 Display Screens of Controller
After the system is powered on, the LCD displays the welcome
information for 5 seconds. The display may vary depending on the
version.
Then the default screen is displayed as follows:
Only in the default screen, press the running key
I
or the stop key
O
on the right side of the panel to turn on or turn off the screw
compressor.
In the display screen of controller, you can browser the running
efesotomasyon.com
To Next Page
Loading...
