Inovance MD380 Series

Product Information MD380 User Manual
- 22 -
Item
6SHFL¿FDWLRQV
Individualized
functions
Multi-motor
switchover
Two motors can be switched over via two groups of motor
parameters.
0XOWLSOH¿HOG
buses
)RXU¿HOGEXVHVDUHVXSSRUWHG0RGEXV578352),%86
DP, CANlink and CANopen.
Motor overheat
protection
7KHRSWLRQDO,2H[WHQVLRQFDUGHQDEOHV$,WRUHFHLYH
the motor temperature sensor input (PT100, PT1000),
implementing motor overheat protection.
Multiple encoder
types
It supports various encoders such as differential encoder,
RSHQFROOHFWRUHQFRGHUUHVROYHU89:HQFRGHUDQG6,1
&26HQFRGHU
8VHU
programmable
function
The optional programming card helps you to realize
secondary development. Its programming environment is
compatible with that of the PLC of Inovance.
Advanced
background
software
It supports operations of AC drive parameters and the
oscillograph function, via which the state inside the AC drive
is monitored.
581
Command source
 2SHUDWLRQSDQHOFRQWURO
 Terminal control
 Communication control
You can perform switchover between these sources in
various ways.
Frequency source
There are a total of 10 frequency sources, such as digital
setting, analog voltage reference, analog current reference,
pulse reference and communication reference.
You can perform switchover between these sources in
various ways.
Auxiliary
frequency source
There are 10 auxiliary frequency sources. The auxiliary
frequency can be used together with the main frequency
IRUVOLJKWDGMXVWPHQWRUVXSHUSRVLWLRQWRLPSOHPHQWWKH¿QDO
frequency reference.
Input terminal
Standard:
5 digital input (DI) terminals, one of which supports up to
100 kHz high-speed pulse input
2 analog input (AI) terminals, one of which only supports
0–10 V voltage input and the other supports 0–10 V voltage
input or 4–20 mA current input
Extension capacity:
5 DI terminals
1 AI terminal that supports -10 to 10 V voltage input and
also supports PT100\PT1000
efesotomasyon.com