Inovance MD380 Series

MD380 User Manual Function Code Table
- 85 -
5.1 Standard Function Parameters
Function
Code
Parameter Name
Setting Range
Default Property
Group F0: Standard Function Parameters
F0-00 G/P type display
1: G type (constant torque load)
2: P type (variable torque load
e.g. fan and pump)
Model
dependent
ƽ
F0-01 Motor 1 control mode
0: SVC
1: CLVC
2: V/F control
0 ƾ
F0-02 Command source selection
2SHUDWLRQSDQHOFRQWURO
LQGLFDWRU2))
7HUPLQDOFRQWUROLQGLFDWRU21
2: Communication control
(indicator blinking)
0 ƿ
F0-03
Main frequency source X
selection
0: Digital setting (non-retentive at
power down)
1: Digital setting (retentive at
power down)
2: AI1
3: AI2
4: AI3
5: Pulse reference (DI5)
6: Multi-reference
7: Simple PLC
8: PID
9: Communication reference
0 ƾ
F0-04
Auxiliary frequency source Y
selection
The same as F0-03
0 ƾ
F0-05
Range base of auxiliary
frequency Y for X and Y
superposition
0: Relative to maximum frequency
1: Relative to main frequency X
0 ƿ
F0-06
Range of auxiliary frequency
Y for X and Y superposition
0%–150%
100% ƿ
efesotomasyon.com