Inovance MD380 Series

Function Code Table
MD380 User Manual
- 86 -
Function
Code
Parameter Name
Setting Range
Default Property
F0-07 Frequency source selection
8QLWVGLJLW)UHTXHQF\VRXUFH
selection)
00 ƿ
0: Main frequency source X
1: X and Y superposition
(superposition relationship
determined by ten's digit)
2: Switchover between X and Y
3: Switchover between X and "X
and Y superposition"
4: Switchover between Y and "X
and Y superposition"
Ten's digit (X and Y superposition
relationship)
0: X+Y
1: X-Y
2: MAX (X, Y)
3: MIN (X, Y)
F0-08 Preset frequency
0.00 to maximum frequency
50.00 Hz ƿ
F0-09 Rotation direction
0: Same direction
1: Reverse direction
0 ƿ
F0-10 Maximum frequency
50.00–500.00 Hz
50.00 Hz ƾ
F0-11
Source of frequency upper
limit
0: Set by F0-12
1: AI1
2: AI2
3: AI3
4: Pulse reference (DI5)
5: Communication reference
0 ƾ
F0-12 Frequency upper limit
Frequency lower limit (F0-14) to
maximum frequency (F0-10)
50.00 Hz ƿ
efesotomasyon.com