Inovance MD380 Series User Manual

MD380 User Manual Introduction
- 3 -
Function Description
Restoring user parameters
It allows you to save or restore the parameters set by
yourself.
+LJKHUDFFXUDF\$,$2
7KH$,$2DFFXUDF\FDQUHDFKDOPRVWPYYLDIDFWRU\
correction or on-site correction.
Customized parameter
display
You can customize the parameters that need to be
displayed.
0RGL¿HGSDUDPHWHUGLVSOD\ <RXFDQYLHZWKHPRGL¿HGSDUDPHWHUV
Action mode selection at
fault occurrence
You can select the action mode of the AC drive when a
fault occurs based on the actual need. The action modes
are as below:
 Coast to stop
 Decelerate to stop
 Continue to run
You can also select the frequency at which the AC drive
continues to run.
PID parameters switchover
Two groups of PID parameters can be switched over via
terminals or can be automatically switched over according
to deviation.
PID feedback loss detection
You can set the PID feedback loss value to realize PID
protection.
','2SRVLWLYHRUQHJDWLYH
logic
<RXFDQVHWWKH','2SRVLWLYHRUQHJDWLYHORJLF
','2UHVSRQVHGHOD\ <RXFDQVHW','2UHVSRQVHGHOD\WLPH
Power dip ride through
It ensures that the AC drive continues to run for a short
time when an instantaneous power down or sudden
voltage reduction occurs.
Timing operation
The AC drive supports timing operation for 6500 minutes
at maximum.
8VHUSURJUDPPDEOHIXQFWLRQ
The externally connected programmable card helps you
to realize secondary development.
Load allocation
Load allocation can be implemented between two MD380
series AC drives through point-to-point communication.
efesotomasyon.com

Inovance MD380 Series Specifications

General

Brand	Inovance
Model	MD380 Series
Category	DC Drives
Language	English