Inovance MD500-EN1 - Product Information; Applicable AC Drive; Introduction; Appearance and Dimensions

1 Product Information
- 9 -
1 Product Information
1.1 Applicable AC drive
Expansion Card AC drive Remark
MD500-EN1
MD500-PLUS -
MD520 -
1.2 Introduction
MD500 series Ethernet/IP communication card (hereinafter referred to as MD500-EN1
card) is an adapter card for Ethernet/IP 󶍾eldbus. It complies with international Ethernet/
IP bus standards and features high e󶎀ciency, 󶍿exible topology, and easy operation.
It is installed in the MD series AC drive to increase the communication e󶎀ciency and
implement the AC drive networking function, which enables the AC drive to be a slave
controlled by the 󶍾eld bus master.
The MD500-EN1 card software version required is 1.00 or later (check the software
version in U0-67 upon power-on after installing the card). The corresponding EDS 󶍾le
name is MD500P_EIP_V1.00.eds. This user guide is applicable only for the MD500-PLUS
series AC drive. If you need to use the MD500-EN1 card with other AC drives, contact our
technical support for details.
1.3 Appearance and Dimensions
Figure 1-1 2. Appearance of the M500-EN1 card
Figure 1-2 Dimensions of the M500-EN1 card


.OVU

ħ


