Safety Instructions
- 7 -
Repair
◆
Equipment installation, wiring, maintenance, inspection, or parts replacement must be
performed by only professionals.
◆
Do not repair the equipment at power-on. Failure to comply will result in an electric
shock.
◆
Before inspection and repair, cut o all equipment power supplies and wait at least 10
minutes.
◆
Require for repair services according to the product warranty agreement.
◆
When the equipment is faulty or damaged, require professionals to perform
troubleshooting and repair by following repair instructions and keep a repair record.
◆
Replace quick-wear parts of the equipment according to the replacement guide.
◆
Do not operate damaged equipment. Failure to comply may result in worse damage.
◆
After the equipment is replaced, perform wiring inspection and parameter settings again.
Disposal
◆
Dispose of retired equipment by following local regulations or standards. Failure to
comply may result in property damage, personal injuries, or even death.
◆
Recycle retired equipment by following industry waste disposal standards to avoid
environmental pollution.
To Next Page
Loading...