Inovance MD520-4T5.5BS - Page 38

Options
‑37‑
Device Model Order No.
Supported Drive
Models
Description
Continued
CANopen/CANlink
communication
expansion card
MD38CAN1 1013100 All models
CANopen/CANlink
communication
adapter card
PROFIBUS DP
communication
card
MD‑SI‑DP1 1040172 T1 to T3
PROFIBUS DP
communication card
PROFIBUS DP
communication
card
MD38DP2 1013144 T4 to T12
PROFIBUS DP
communication card
PROFINET
communication
expansion card
MD500‑PN1 1040098 All models
PROFINET
communication
adapter card
EtherCAT
communication
expansion card
MD500‑ECAT 1040113 All models
EtherCAT
communication
adapter card
Continued Ethernet/IP
communication
expansion card
MD500‑EN1 01040167 All models
Ethernet/IP
communication
adapter card
User
programmable
card
MD38PC1 1013104 T4–T12
User programmable
expansion card;
compatible with H1U
series PLCs of Inovance
Resolver interface
card
MD38PG4 1013081 All models
Applicable to the
resolver; excitation
frequency 10 kHz; DB9
interface
To meet the MD38PG4
requirements, the
excitation input DC
resistance of the
resolver must be
greater than 17 Ω.
Failure to comply may
result in MD38PG4
exceptions. Select a
resolver with a
maximum of four pole
pairs. Otherwise,
MD38PG4 will be
overloaded.