Inovance MD520-4T5.5BS - Page 39

Options
‑38‑
Device Model Order No.
Supported Drive
Models
Description
Continued
MD38PGMD multi‑
function encoder
card
MD38PGMD 1013147 All models
Collector and
differential encoder
interface card with an
optional multiplied
frequency‑division
output; adaptable to 5
V/15 V power supply
This card supports
differential input,
collector input, and
push‑pull input;
supports differential
output and collector
output. In addition, it
supports a variety of
interfaces such as
encoder interfaces and
host controller A/B
phase input interfaces.
23‑bit PG card ES510–PG‑CT1 1320007 All models
Applicable to 23‑bit
encoders of Inovance;
with a DB9 interface
Mounting
accessories
Through‑hole
mounting bracket
MD500‑AZJ‑A1T1 1040072 T1 The option meets
requirements of
through‑hole
mounting. It applies
only to T1 to T9
models.
MD500‑AZJ‑A1T2 1040073 T2
MD500‑AZJ‑A1T3 1040074 T3
MD500‑AZJ‑A1T4 1040075 T4
MD500‑AZJ‑A1T5 1040001 T5
Continued Continued
MD500‑AZJ‑A1T6 1040002 T6
Continued
MD500‑AZJ‑A1T7 1040003 T7
MD500‑AZJ‑A1T8 1040004 T8
MD500‑AZJ‑A1T9 1040005 T9
Continued
Grounding bracket
of cable shield
MD500‑AZJ‑A2T1 1040085 T1
The option is used for
secondary fixing of
power cables and
stable grounding of the
shield. It applies only to
T1 to T9 models.
MD500‑AZJ‑A2T2 1040088 T2
MD500‑AZJ‑A2T3 1040083 T3
MD500‑AZJ‑A2T4 1040082 T4
MD500‑AZJ‑A2T5 1040081 T5
MD500‑AZJ‑A2T6 1040086 T6
MD500‑AZJ‑A2T7 1040087 T7
MD500‑AZJ‑A2T8 1040084 T8
MD500‑AZJ‑A2T9 1040089 T9