Options
‑39‑
Device Model Order No.
Supported Drive
Models
Description
Continued
Guide rail MD500‑AZJ‑A3T10 1040009 T10 to T12
The option is used for
installing the AC drive
in a cabinet. For T10
models and models
above T10, it is
recommended that a
guide rail be used to
push the AC drive into
the cabinet.
UVW output copper
busbar
MD500‑TP‑T10 01040125 T10 MD520 models
excluding that with the
base (‑L) are delivered
with the UVW output
copper busbar.
MD500‑TP‑T11 01040126 T11
MD500‑TP‑T12
01040127 T12
Cables
Main circuit cable
Lugs manufactured by Suzhou Yuanli are recommended.
For details of recommended lugs, see "
5.3.1 Main Circuit
Cable
"
on page 54
.
It is recommended that
the input and output
main circuit cables and
power cables use
symmetrical shielded
cables. Compared with
four‑conductor cables,
symmetrical shielded
cables can reduce
electromagnetic
radiation in the whole
transmission system.
Control circuit
cable
All control circuit cables must be shielded cables. Use a separate shielded cable for
each type of analog signal. It is recommended that digital signal cables use shielded
twisted pair (STP) cables.
External LED
operating panel
MDKE‑10
/
All models
LED display
Continued
External LCD
operating panel
SOP‑20 1040028 All models
The external LCD
operating panel
supports parameter
copying and English or
Chinese display.
Extension cable
MDCAB 1013008 All models
The standard 8‑
conductor cable in
three meters can
connect to LED
operating panel
MDKE10 and LCD
operating panel SOP‑
20.
MDCAB‑1.5 15048471 All models
1.5‑meter cable used to
connect the external
operating panel
To Next Page
Loading...
