Product maintenance
13
3. Cleaning cloth maintenance
A. Take off the cleaning cloth, rinse and spread it out to dry; as shown in Figure J.
4. Sensor lens and electrode slice cleaning
! Notes:
* Please do not use the dripping cloth directly to avoid product from slipping during
work.
* Use environment: wooden floor, ceramic tile, marble, painted hard floor and other
floors.
* The rag belongs to water tank component, which is only applicable to some
models, and the details are subject to the packing list.
A. Use a cleaning tool or a soft cloth to gently wipe the sensor and the charging
electrode, and mark the position as shown in the figure below.
B. Use a cleaning tool or a soft cloth to clean the charging connecting piece on the
charging stand, and mark the position as shown in the figure below.
Charging connection slice
Sensor Sensor
Electrode slice
To Next Page
Loading...
