Chapter 7 Setting the Channels
31
31
7 Setting the Channel
7-1 Setting Channels Automatically (AUTO SEARCH)
Use this option to quickly add all channels that have a signal to the channel list.
TO ADD CHANNELS AUTOMATICALLY
1. Press the MENU button on the remote control to
open the OSD.
2. Press the Navigation (UP/DOWN) buttons to
select the Setup menu.
3. Press OK to open the menu.
4. Press the Navigation (UP/DOWN) buttons to
select AUTO SEARCH.
5. Press OK to start the auto scanning of channels.
6. Press EXIT to close the OSD.
7-2 Setting Channels Manually (MANUAL SEARCH)
Use this option to add certain channels to the channel list.
TO ADD CHANNELS MANUALLY
1. Press the MENU button on the remote control to
open the OSD.
2. Press the Navigation (UP/DOWN) buttons to
select the Setup menu.
3. Press OK to open the menu.
4. Press the Navigation (UP/DOWN) buttons to
select MANUAL SEARCH.
5. Press OK to select
6. Select the channel to add to the channel list.
7. Press the Navigation (RIGHT) to Add Channel.
8. Press EXIT to close the OSD.
To Next Page
Loading...
