12
IS-NXT10232 Designer shelf system
www.insignia-products.com
6 Press the OPEN/CLOSE button again to
close the CD door. The disc will spin and “CD
READ” will flash in the track number.
7 After successfully searching the disc, the
display shows:
CD Disc—Total number of tracks and total
playing time.
MP3 Disc—Total number of tracks and total
number of folders.
8 Press Play/Pause button to start playback.
The display will show the elapsed playing
time of each track as it plays.
9 Adjust the MAIN VOLUME and BASS
VOLUME level if necessary.
10 When the last track has played, the player
stops automatically. You can also stop
playback at any time by pressing the STOP
button on the front panel or STOP/BAND
button on the remote control.
11 When you are finished listening, press the
OPEN/CLOSE button on the front panel to
open the CD Door.
12 Remove your disc and press the OPEN/
CLOSE button again to close the CD door.
13 Press the STANDBY/ON button to return the
system to the Standby (Power Off) mode.
P
AUSE CONTROL
To momentarily pause during CD playback:
1 Press the PLAY/PAUSE button. The sound
stops and the elapsed time flashes on the
display. The disc continues to spin.
2 Press the PLAY/PAUSE button once more to
cancel Pause mode and resume playback.
The elapsed time stops flashing.
S
KIP/SEARCH CONTROLS
To skip to higher or lower numbered tracks
during playback:
1 Repeatedly press the SKIP/TUNE > or <
button until the track number you want
appears in the display. Playback will begin on
that track.
Or, to perform high speed search within a
track, to locate a specific musical passage,
press and hold the SKIP/TUNE > or < button
for at least 1 second. The player will move
rapidly forward or backward as long as the
button is depressed. Release the button and
normal playback will resume at that point.
S
TARTING PLAYBACK ON A SPECIFIC TRACK
To start playback on a specific track:
1 Load the disc as usual and wait until the disc
information appears on the display.
2 For CDs, press the SKIP/TUNE > or < button
until the track number you want appears in
the display, then press the PLAY/PAUSE
button to begin playback on that track.
Or, for MP3, press the PRE/ALB + or - button
to select a folder number, then press the
SKIP/TUNE > or < button to select a track
number. Press the PLAY/PAUSE button to
begin playback on that track.
F
INDING A SPECIFIC MP3 TRACK (BY ALPHABETICAL
ORDER) (REMOTE CONTROL ONLY)
To find a specific MP3 track:
1 Press the ST/MO/FIND button once on the
remote control when the disc is playing or
stopped. The “ “ logo flashes on the
display.
The system sorts the tracks from A-Z and
0-9, in ascending alphanumeric order, by the
first character of the tracks.
2 Press the SKIP/TUNE > or < button to select
a letter or number.
Caution
Do not put fingers, pens, or anything else in,
or in front of, the motorized CD door to
interfere with the motion of the door. Any
action that could jam the motorized door
could damage it.
Note
If the disc is inserted upside down or if the
disc is badly scratched and unreadable,
playback will not be possible. In that case,
the main display will show “NO DISC.”
Remove the disc and re-insert it correctly, or
try another disc.
Note
If the disc is neither Music CD nor MP3 CD
format, the unit might still read the disc and
start playback on a mute track. In that case,
remove the disc from the unit.
NXT Designer shelf system - combined.fm Page 12 Wednesday, July 6, 2005 9:04 AM
To Next Page
Loading...
