6
IS-NXT10232 Designer shelf system
www.insignia-products.com
Getting to know your
system
Location of controls and connections
TUNER/CD UNIT - FRONT PANEL
TUNER/CD UNIT - BACK PANEL
Item
Control/
connection
Function
1Function
button
Selects functions
(Tuner>CD>Aux)
2 Timer button Sets the turn-on timer.
3 Preset/Album
+ button
In Tuner mode, selects the next
preset. Playing MP3 discs,
selects the next album.
4 Standby/On
button
Toggles the system from
Standby mode to on.
5 Sleep button Sets the sleep timer.
6 Remote
control sensor
Receives the remote control
signal from the remote control
unit.
7 Preset/Album -
button
In Tuner mode, selects the
previous preset. Playing MP3
discs, selects the previous
album.
8Clock/Program
button
Sets the clock, programs
presets, and programmed
playback options.
9 AM/FM button In Tuner mode, toggles
between AM and FM bands.
10 LCD display
with backlight
Displays system status and
other information.
11 Play/Pause
button
Begins playback, then toggles
between Play and Pause
modes.
12 Skip/Tune >>
button
Goes to the next track or higher
tuner frequency.
13 Digital volume
+ button
Increases volume
14 Open/close
button
Opens and closes CD/MP3
drawer.
15 Digital volume
- button
Decreases volume
16 Skip/Tune <<
button
Goes to the previous track or
lower tuner frequency.
17 Stop button Stops playback.
Item
Control/
Indicator
Function
1 AUX IN (R)
jack
Attach the right speaker output
from an outside sound source
to this connector.
2 AUX IN (L)
jack
Attach the left speaker output
from an outside sound source
to this connector.
3TO
SUBWOOFER
jack
Attach one end of a 9-pin cable
to this connector and the other
end to the FROM MAIN
connector on the Amplifier/
Subwoofer unit.
4 ANT The FM wire antenna.
Item
Control/
connection
Function
To Next Page
Loading...
Need help?
General
