14
IS-NXT10232 Designer shelf system
www.insignia-products.com
3 To generate another track, press the SKIP/
TUNE > or < button.
4 To cancel the Random mode, press the
RANDOM button until the RANDOM indicator
disappears. Random mode can also be
canceled by pressing the STOP button on the
front panel or the STOP/BAND button on the
remote control, opening the CD door, or
switching to the TUNER or AUX function.
Programmed playback
This system has a 64-track programmable
memory. You can program up to 64 tracks on a
disc to play back in any order.
To use programmed playback - CD:
1 Load your disc as usual and wait until the
display shows the total playing time and
number of tracks.
2 Press the CLOCK/PROG button. Track
number “00,” the “PROGRAM” indicator, and
program memory number “P-01” appear on
the display.
3 Press the SKIP/TUNE > or < buttons to
select the first track you want to program.
In this example: Track 03.
4 Press the CLOCK/PROG button again to
enter track 03 in program memory 01. The
Program number advances to “P-02” and the
track display returns to “00.”
5 Repeat Steps 3 and 4, selecting a different
track number each time until you have
entered up to 64 tracks in the memory.
6 Press the PLAY/PAUSE button to begin
programmed playback.
To use programmed playback - MP3:
1 Load your disc as usual and wait until the
display shows the total number of tracks.
2 Press the CLOCK/PROG button. The
“PROGRAM” indicator, the track number
“000,” and program memory number “P-01”
appear on the display while folder number
“00” is flashing.
3 Press the SKIP/TUNE > or < buttons to
select the folder you want to open.
In this example: Folder 04.
4 Press the CLOCK/PROG button again to
open the folder.
5 Press the SKIP/TUNE > or < button to select
the track you wish to program.
In this example: Track 002.
6 Press the CLOCK/PROG button again to
enter track 02 of folder 04 in program
memory 01. The program number advances
to “P-02” and the folder and track display
return to “00” and “000,” respectively.
7 Repeat Steps 3 through 6, selecting a
different track number each time until you
have entered up to 64 tracks in the memory.
8 After you have programmed up to 64 tracks,
press the PLAY/PAUSE button to begin
programmed playback.
The PROGRAM indicator remains in the
display and the tracks you selected will be
played in the order you specified.
Note
Pressing the RANDOM button starts playing
randomly selected tracks and stops the
track that is currently playing.
Note
You cannot program the player while a disc
is playing. You must press the STOP button
on the front panel or STOP/BAND button on
the remote control first to stop playback
before beginning the programming steps
below.
NXT Designer shelf system - combined.fm Page 14 Wednesday, July 6, 2005 9:04 AM
To Next Page
Loading...
