Insignia NS-32DD200NA14 - Connecting Devices - Computer; Using HDMI (Best)

26
Insignia 32" LED TV/DVD Combo
www.insigniaproducts.com
Using HDMI (best)
To connect a computer using HDMI:
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the HDMI
OUT jack on the computer.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S or T to highlight HDMI 1, HDMI 2, or HDMI 3, then press OK.
6 Adjust the display properties on the computer, if necessary.
Note
You can also press HDMI to select the computer.
HDMI cable
Side of TV
HDMI cable
connector
HDMI jack
On your TV