30
Insignia 32" LED TV/DVD Combo
www.insigniaproducts.com
Connecting a basic home theater system
Using digital audio
To connect a basic home theater system or sound bar using digital audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT jack on the side of your TV and to
the optical AUDIO IN jack on the digital home theater system sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
5 On your TV, set the Digital Audio/SPDIF option on the AUDIO menu to PCM. See “Adjusting sound settings” on
page 45.
Digital optical audio cable
Home theater
system
Side of TV
Digital optical
audio cable
connector
Digital optical
audio jack
On your TV
To Next Page
Loading...
