48
Insignia 32" LED TV/DVD Combo
www.insigniaproducts.com
B If you select Cable, a message asks if you
have a cable box:
•Select No, then press OK if no cable box is
connected. Your TV scans for available
channels. The scan may take several
minutes.
•Select Ye s , then press OK if a cable box is
connected. A message asks how you
connected the cable box to your TV:
•Select HDMI, Component, or AV, then
press OK if you connected a cable box
to your TV using one of these cables.
Read the message, then press OK to
close the wizard.
•Select Coaxial, then press OK if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press OK to start the channel scan (VHF
channels only).
C If you select Satellite Box, a message asks
how you connected the satellite box to your
TV:
• Select HDMI, Component, or AV, then
press OK if you connected a satellite box to
your TV using one of these cables. Read
the message, then press OK to close the
wizard.
• Select Coaxial, then press OK if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press OK to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
To Next Page
Loading...
