Insignia NS-32LB451A11 User Manual

6
NS-32LB451A11 Insignia 32" LCD TV/Blu-ray Combo, 1080p
www.insigniaproducts.com
Installing a wall-mount bracket
To attach your TV/Blu-ray combo to a
wall-mount bracket:
1 Remove the two screws on the back of the stand
that secure the back cover, then remove the
cover.
2 Remove the eight screws holding the TV/Blu-ray
combo to its stand, then remove the stand.
3 Attach the wall-mount bracket with M4 screws
(not provided).
TV/Blu-ray combo
components
Accessories
• Remote control
• Batteries AA (2)
• Remote control holder
•AC power cord
• Cleaning cloth
•Component cable
•Audio cable
•Stand
• Stand screws and washers (4)
•Stand column screws (8)
• Stand cover screws (2)
• Quick Setup Guide
Front
Warning
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of hazards,
do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
7.87" (200 mm)
7.87" (200 mm)
# Item Description
Power indicator
Lights blue when your TV/Blu-ray combo is turned on.
Lights red when your TV/Blu-ray combo is in standby
mode.
Does not light when the power cord is unplugged.
For more information, see “Turning your TV/Blu-ray
combo on or off” on page 23.
Remote sensor
Receives signals from the remote control. Do not block.
1
2

Insignia NS-32LB451A11 Specifications

General

Brand	Insignia
Model	NS-32LB451A11
Category	TV DVD Combo
Language	English