Insignia NS-39DR510CA17 - Connecting a DVD or Blu-ray player; HDMI (best)

24
NS-39DR510NA17 / NS-39DR510CA17
www.insigniaproducts.com
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see What connection should I use? on page 19.
You can connect a DVD or Blu-ray player using:
•HDMI® (best)
• AV (composite video) (good)
HDMI® (best)
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI® cable (not provided) to an HDMI jack on the back or side of your TV and to the HDMI OUT jack
on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 On the Home screen, press or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
Note
An HDMI® cable carries both audio and video. You do not need to use any
audio cables.
Back of TV
HDMI® cable
DVD or Blu-ray
player
HDMI® cable
connector
HDMI® jack
On your TV