33
39" 1080p, 60Hz, LED Roku TV
www.insigniaproducts.com
Analog audio
When you connect an analog system or soundbar to the /AUDIO OUT jack, your TV speakers are muted.
1 Make sure that your TV’s power cord is unplugged and the analog speaker system or soundbar is turned off.
2 Connect an audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the AUDIO IN jacks
on the analog speaker system or soundbar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or soundbar.
Note
Use the volume controls on the analog speaker system or soundbar to
control the volume.
On your TV
Audio cable
connector
/AUDIO OUT
jack
Analog speaker system
Soundbar
Side of TV
To Next Page
Loading...
