Insignia NS-39L700A12 - Connecting via DVI; Connecting via Component Video

11
Insignia 39" LCD TV
www.insigniaproducts.com
Using DVI (same as HDMI but requires a sound
connection)
To connect a cable or satellite box using DVI:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not included) to
one end of an HDMI cable (not included), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to an HDMI
jack on side of your TV.
5 Connect an audio cable (not included) to the
L/RAUDIO jacks on the side of your TV and to
the AUDIO OUT jacks on the cable or satellite
box.
6 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the Setup Wizard on page 19.
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV’s power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
included) to the COMPONENT IN Y/P
B/PR video
jacks on the side of your TV and the component
video out jacks on the cable or satellite box.
4 Connect an audio cable (not included) to the
L/RAUDIO jacks on the side of your TV and to
the audio out jacks on the cable or satellite TV
box.
5 Plug your TV’s power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the Setup Wizard on page 19.
Note
When you connect the audio using the L/R AUDIO
jacks, the audio output is analog.
+'0,
&20321(17
,1

+'0,
$17
&$%/(,1
&2$;,$/
$9,1
USB
AUDIO
L
R
Y/ VIDEO
PB
PR
Cable or satellite box
HDMI cable with
HDMI-DVI adapter
Audio cable
Note
The COMPONENT IN video jacks share the audio
jacks with the AV IN VIDEO jack.
When you connect the audio using the L/R AUDIO
jacks, the audio output is analog.
+'0,
&20321(17
,1

+'0,
$17
&$%/(,1
&2$;,$/
$9,1
USB
AUDIO
L
R
Y/ VIDEO
PB
PR

Audio cable
Cable or satellite box
Cables are often
color-coded to
match color-coded
jacks.
Component video
cable