24
Insignia 39" LCD TV
www.insigniaproducts.com
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Low, Middle, High,
or Off.
• Backlight—Sets the overall brilliance of
the screen. When Dynamic Contrast Ratio
is turned on, you cannot change the
Backlight setting.
• Advanced Contrast—Selects from:
• Adaptive Contrast—Automatically
adjusts picture detail and brightness.
You can select On or Off.
• Dynamic Contrast Ratio—Enhances
the contrast ratio between light and
dark areas of the picture. You can select
On or Off. When this option is turned
on, you cannot change the backlight
option.
• Reset Picture Settings—Resets all picture
settings to factory mode.
4 Press
W or X to adjust the option, or press S or
T to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Adjusting the sound
Adjusting sound settings
To adjust sound settings:
1 Press MENU. The on-screen menu opens.
2 Press
W or X to highlight Audio, then press T or
ENTER. The Audio menu opens.
3 Press
S or T to highlight an option, then press
ENTER to access the option. You can select:
• Surround—Provides the ultimate home
theater sound experience.
• Treble—Adjusts the high sounds.
• Bass—Adjusts the low sounds.
• Balance—Adjusts the balance between the
left and right audio channels.
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select PCM
(to output audio in 2-channel stereo), or RAW
(to pass through the original digital audio
sound).
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• MONO—Select this option if there is noise
or static on weak stereo broadcasts.
• STEREO—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Reset Audio Settings— Resets all audio
settings to factory defaults.
4 Press
W or X to adjust the option, or press S or
T to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
Move
OK
ENTER
ME NU
EXIT
Exit
Previous
Select
Adjust settings to affect picture quality
Picture Audio
Channels Settings USB
Picture
Mode
Brightness
Contrast
Color
Tint
Custom
60
Sharpness
Advanced Video
Reset Picture Settings
60
60
0
50
Move
OK
ENTER
ME NU
EXIT
Exit
Previous
Select
Surround provides the ultimate home theater sound solution
Picture Audio
Channels Settings USB
Audio
Surround
Treble
Bass
Balance
Digital Audio/SPDIF
60
Audio Language
MTS/SAP
R es et A udio S ettings
60
0
RAW
English
Mono
Note
You can quickly adjust audio settings by using the
AUDIO and
W or X buttons on the remote control.
Press AUDIO repeatedly to toggle between the
Surround, Bass, Treble, Balance, and Reset Audio
Settings screens, then press
W or X to adjust the
option.
Note
You can also press MTS/SAP one or more times to
select the audio mode.
Move
OK
ENTER
ME NU
EXIT
Exit
Previous
Select
Adjust settings to affect picture quality
Picture Audio
Channels Settings USB
Picture
Mode
Brightness
Contrast
Color
Tint
Custom
60
Sharpness
Advanced Video
Reset Picture Settings
60
60
0
50
To Next Page
Loading...
