Insignia NS-39L700A12 - Connecting External Devices

15
Insignia 39" LCD TV
www.insigniaproducts.com
Using component video (better)
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV’s power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect a component video cable (not
included) to the COMPONENT IN Y/P
B/PR jacks
on the side of your TV and to the COMPONENT
OUT jacks on the component video device.
3 Connect an audio cable to the L/R AUDIO jacks
on the side of your TV and to the L/R AUDIO
OUT jacks on the component video device.
4 Plug your TV’s power cord into a power outlet,
then turn on your TV.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S or T to select Component, then press
ENTER.
7 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
Using composite video (good)
To connect a DVD or Blu-ray player using
composite video:
1 Make sure that your TV’s power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an AV cable (not included) to the
AV IN VIDEO jack and L/R AUDIO jacks on the
side your TV and to the AV OUT jacks on the
DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet,
then turn on your TV.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S or T to select AV, then press ENTER.
6 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
Notes
The COMPONENT IN video jacks share the audio
jacks with the AV IN VIDEO jack.
When you connect the audio using the L/ RAUDIO
jacks, the audio output is analog.
Note
You can also press COMP to select Component.
+'0,
&20321(17
,1

+'0,
$17
&$%/(,1
&2$;,$/
$9,1
USB
AUDIO
L
R
Y/ VIDEO
PB
PR
17
%/(,1

Component video cable
Audio cable
Cables are often color-coded to
match color-coded jacks.
DVD or Blu-ray player
Note
The AV IN VIDEO jack shares the audio jacks with the
COMPONENT IN video jacks.
When you connect the audio using the L/RAUDIO
jacks, the audio output is analog.
Notes
•You can also press VIDEO to select AV.
• When you connect the audio using the
AUDIO L/ R jacks, the audio output is analog.
+'0,
&20321(17
,1

+'0,
$17
&$%/(,1
&2$;,$/
$9,1
USB
AUDIO
L
R
Y/ VIDEO
PB
PR

DVD or Blu-ray player
Cables are often color-coded to
match color-coded jacks.
Note: The yellow video
connector on the AV cable
connects to the green
AV IN VIDEO jack.
AV cable