30
Insignia 40" LED TV
www.insigniaproducts.com
VGA (good)
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect a VGA cable (not provided) to the VGA jack on the back of your TV and to the VGA jack on the
computer.
3 Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO
OUT (headphone) jack on the computer.
4 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S or T to select VGA, then press ENTER.
7 If necessary, adjust the computer settings on your TV. For more information, see “Adjust the computer image”
on page 55.
OR
Adjust the display properties on the computer.
Audio
cable
VGA cable
Back of TV
VGA cable
connector
Audio cable
connector
VGA jack PC/DVI
AUDIO IN jack
On your TV
To Next Page
Loading...
