Why is my Insignia LED TV remote not working?
If your Insignia LED TV remote control isn't working, ensure the power cord is properly connected to the TV and outlet. Remove any obstructions between the remote and the sensor on the TV's front. Point the remote directly at the sensor. Verify that you've removed all plastic wrapping from the batteries and that the batteries are correctly installed. If problems persist, replace the batteries.
How do I program my universal remote to my Insignia LED TV?
If you're experiencing trouble programming your universal remote with your Insignia LED TV, consult the instructions and the table of common codes. Codes are subject to change, so for the most up-to-date codes, visit www.insigniaproducts.com/remotecodes. Also, ensure that you replace dead batteries with new ones. If problems persist, refer to the user guide that came with your universal remote and contact the manufacturer.
Why is the color wrong on my Insignia LED TV?
If your Insignia LED TV has no color, a dark picture, or incorrect colors, try switching to another channel as the station may be experiencing problems. Adjust the color settings of your TV. Ensure that the video cables are correctly and securely connected to your TV, as well as the antenna or cable TV connection. If you're using an antenna, the digital channel signal may be low, so consider adjusting the antenna or using a more directional outdoor antenna or set-top antenna with a built-in amplifier.
Why is picture quality bad on some Insignia NS-46E340A13 channels?
If the picture quality is good on some channels and poor on others on your Insignia LED TV, the problem may stem from a weak signal from your broadcaster or cable TV provider. If you're connected to cable or satellite TV without a set-top box, you might need to install one to improve signal reception and picture quality. Contact your provider to inquire about upgrading to a set-top box.
What to do if my Insignia NS-46E340A13 says 'No signal'?
If your Insignia LED TV displays a “No signal” error, first, press the INPUT button to select the correct input for your device. If you are using a cable or satellite box, use the remote that came with the box to change channels and make sure that you have the correct input selected.
Why does my Insignia LED TV only show snow?
If your Insignia LED TV displays only snow (noise), try changing to another channel as the station might be experiencing issues. Also, ensure that the antenna or cable TV is securely connected. If you're using an antenna, the digital channel signal might be weak. If so, consider adjusting the antenna or using a more directional antenna with a built-in amplifier.
Why does my Insignia NS-46E340A13 have no power?
If your Insignia LED TV has no power, ensure the power cord is correctly connected to both the TV and the power outlet. If it's connected, unplug the cord, wait 60 seconds, then plug it back in and turn on the TV. Also, check for interference from other devices like surround sound receivers or fans. Try turning them off one by one to identify any source of interference and move it away from the TV.
How to fix sound on Insignia NS-46E340A13 LED TV?
If your Insignia LED TV has good picture but no sound, first, increase the volume and make sure that the sound is not muted. Ensure that headphones are not connected, as this will prevent sound from coming from the TV speakers. Check that the correct audio mode is selected and that the audio cables are correctly and securely connected to your TV. Also, make sure that the antenna or cable TV is connected correctly and securely. If using an antenna, the digital channel signal may be low. Finally, the audio cables you are using may be faulty, so try a new set.
What is the default password for Insignia NS-46E340A13?
If you've lost the password for your Insignia LED TV, enter 9999 to access parental controls, then set a new password.
Why are channels missing on my Insignia LED TV?
If one or more channels do not display on your Insignia LED TV, first ensure that the channels are not blocked in parental control settings. Then, check if the channels are hidden, as they may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or add the channel back to the list. If you are using a cable or satellite box, use the remote that came with that box to change channels and make sure that you have the correct input selected. If you are using an antenna, the digital channel signal may be low.
General| Screen Size | 46 inches |
|---|---|
| Display Type | LED |
| Resolution | 1920 x 1080 |
| Refresh Rate | 60 Hz |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Smart TV | No |
| Display Technology | LED |
| Inputs | HDMI, USB, Composite, Component |
| Weight | 33.1 lbs |
Key safety guidelines and warnings for product use.
Specific warnings and cautions to prevent hazards.
Steps to connect the TV's power cord to an outlet.
Guides for connecting cable/satellite boxes via HDMI.
Instructions for connecting an antenna or coaxial cable directly.
How to connect DVD/Blu-ray players via various inputs like HDMI, DVI, Component.
Steps for connecting a VCR using composite video and audio cables.
How to connect camcorders and game consoles using AV cables.
Guides for connecting a computer via VGA or HDMI.
How to connect audio systems using digital or analog audio.
Guide to choosing the correct input for connected devices.
Steps to set or change the parental control password for restricted content.
Solutions for common picture and sound issues.
To Next Page