33
43"/50"/55"/65" UHD 4K / 2160p, 60Hz, LED Roku TV
www.insigniaproducts.com
Digital audio using the HDMI 3/ARC jack
Your TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers.
When you connect external speakers or a soundbar, sound plays through your TV speakers and the external speakers or
soundbar.
1 Make sure that your TV’s power cord is unplugged and the digital speaker system or soundbar is turned off.
2 Connect an HDMI® cable (not provided) to the HDMI 3/ARC jack on the back of your TV and to the HDMI IN jack on
the digital speaker system or soundbar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or soundbar.
5 To turn off your TV speakers, on the Home menu, press or to highlight Settings, then press OK. Highlight
Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers
enabled check box.
6 To configure the HDMI 3/ARC jack to output sound to an ARC device, on the Home menu, press or to highlight
Settings, then press OK. Highlight System, then press OK. Highlight Control other devices (CEC), then press OK.
Highlight HDMI ARC, then press OK to check the box.
On your TV
ARC audio device
Soundbar
HDMI® cable
connector
HDMI 3/ARC
jack
Back of TV
HDMI®
cable
To Next Page
Loading...
Need help?
General