Insignia NS-43DR620CA18 User Manual

34
NS-43DR620NA18 / NS-50DR620NA18 / NS-55DR602NA18/NS-65DR620NA18
NS-43DR620CA18 / NS-50DR620CA18 / NS-55DR620CA18
www.insigniaproducts.com
Analog audio using the AUDIO OUT jack
When you connect an analog speaker system or soundbar to the AUDIO OUT jack, sound plays through the TV speakers
and the audio device.
1 Make sure that your TV’s power cord is unplugged and the analog speaker system or soundbar is turned off.
2 Connect an audio cable (not provided) to the AUDIO OUT jack on the back of your TV and to the AUDIO IN jacks on
the analog speaker system or soundbar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the analog speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the analog speaker system or soundbar.
Note
Use the volume controls on the analog speaker system or soundbar to
control the volume.
Audio cable
Analog speaker system
Back of TV
Audio cable
connector
AUDIO OUT
jack
On your TV
Soundbar

Insignia NS-43DR620CA18 Specifications

General

Brand	Insignia
Model	NS-43DR620CA18
Category	TV
Language	English