Insignia NS-46E480A13 Specifications

Insignia NS-46E480A13

2 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

TRUSTED BY MILLIONS AS A GREAT TV!

DEPENDABLE PERFORMANCE

RIGOROUSLY TESTED

24/7 INSIGNIA TECHNICAL SUPPORT

COMMUNITY FORUM ADVANTAGE

LLED D TV

NS-46E480A13

C

M

Y

CM

MY

CY

CMY

K

NS-46E480A13_12-0397_MKTG_V2.eps 1 4/18/2012 11:01:23 AMNS-46E480A13_12-0397_MKTG_V2.eps 1 4/18/2012 11:01:23 AM

Other manuals for Insignia NS-46E480A13

User Guide59 pages

Important Information8 pages

Information Importante8 pages

Información Importante8 pages

Quick Setup Guide2 pages

Guía De Instalación Rápida2 pages

Questions and Answers:

J
Jeremy SmithAug 21, 2025
How to fix Insignia NS-46E480A13 LED TV remote control not working?
- D
  Dana BridgesAug 22, 2025
  If the remote control for your Insignia LED TV isn't working, check these solutions: * Make sure the TV's power cord is properly connected to both the TV and the power outlet. * Ensure there are no obstructions between the remote and the TV's remote control sensor. * Point the remote directly at the remote control sensor on the TV. * Remove any plastic wrapping from the batteries. * Verify the batteries are installed correctly. * Replace dead batteries with new ones.
L
Lindsey MartinAug 23, 2025
Why is the color off on my Insignia NS-46E480A13 LED TV?
- J
  jason97Aug 23, 2025
  If your Insignia LED TV has no color, a dark picture, or incorrect colors, try the following: * Try another channel, as the station may be experiencing problems. * Adjust the color settings. * Make sure the video cables are connected correctly and securely to your TV. * Make sure the antenna or cable TV is connected correctly and securely. * If you are using an antenna, the digital channel signal may be low. * If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
T
Thomas GreerAug 25, 2025
Why won't my Insignia NS-46E480A13 turn on?
- D
  Debra DunlapAug 26, 2025
  If your Insignia LED TV has no power, check the following: * Make sure that the power cord is correctly connected to your TV and a power outlet. * Unplug the power cord, wait 60 seconds, then plug the cord back in and turn on your TV. * Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference.
V
vgoodwinAug 26, 2025
What to do if Insignia LED TV control buttons not working?
- N
  Nancy OrtegaAug 27, 2025
  If the control buttons on your Insignia LED TV do not work: * Make sure that the Button Lock option is set to Off. * Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV.
L
Lauren JordanAug 27, 2025
Why is there no picture or sound on my Insignia NS-46E480A13?
- R
  Ronald LucasAug 28, 2025
  If your Insignia LED TV has no picture and no sound, try the following: * Press the power button on the TV or the remote control. * Ensure the Audio Only option is set to Off. * Check that the video cables are securely connected. * Adjust the contrast and brightness. * Confirm the power cord is plugged in. * Select the correct video input source. * Try another channel as the station may be experiencing problems. * Verify the incoming signal is compatible. * Ensure the antenna or cable TV is properly connected. * Check the closed caption settings, as some TEXT modes can block the screen.
D
Donald LongAug 29, 2025
Why is there sound not working on my Insignia LED TV?
- J
  Jennifer ScottAug 29, 2025
  If your Insignia LED TV has a good picture but no sound, try these steps: * Increase the volume. * Make sure the sound is not muted. * Disconnect headphones, as they disable TV speakers. * Select the correct audio mode. * Check that the audio cables are securely connected. * Ensure the antenna or cable TV is properly connected. * If using an antenna, check the digital channel signal strength. * Try a new set of audio cables, as the current ones may be faulty.
K
Kevin CunninghamAug 30, 2025
What to do if my Insignia LED TV says no signal?
- C
  christopher80Aug 31, 2025
  If your Insignia LED TV displays a “No signal” error message: * Press the INPUT button and select the correct input for your device or service. * If using a cable or satellite box, use its remote to change channels. * Ensure you have selected the correct input to view channels from the cable or satellite box.
T
Terry BrownSep 1, 2025
Why does my Insignia NS-46E480A13 have sound but no picture?
- J
  Justin NavarroSep 1, 2025
  If your Insignia LED TV has a lit screen but the picture is dark, poor, or nonexistent, while the sound is good, consider the following: * Try another channel, as the station may be experiencing problems. * Make sure the antenna or cable TV is connected correctly and securely. * Adjust the brightness settings. * Select the correct picture mode. * If using an antenna, check the digital channel signal strength. * If the signal strength is low, adjust the antenna or use a highly directional outdoor or set-top antenna with an amplifier. * Ensure the video cables are securely connected to your TV. * Try a new set of video cables, as the ones you are using may be bad.
J
justin94Sep 2, 2025
Why are channels missing on my Insignia LED TV?
- I
  isanchezSep 2, 2025
  If one or more channels are not displaying on your Insignia LED TV: * Ensure the channels are not blocked via parental controls. * Check that the channels are not hidden, as they may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or add the channel back to the channel list. * If using a cable or satellite box, use its remote to change channels. * Make sure you have selected the correct input to view channels from the cable or satellite box. * If using an antenna, the digital channel signal may be low.
L
Lisa MorrisonSep 4, 2025
Why is my Insignia LED TV showing static?
- H
  heather76Sep 4, 2025
  If your Insignia LED TV screen only shows snow (noise), try the following: * Try another channel, as the station may be experiencing problems. * Make sure the antenna or cable TV is connected correctly and securely. * If you are using an antenna, the digital channel signal may be low. * If you are using an antenna and the signal strength is low, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.

Insignia NS-46E480A13 Specifications

General

Screen Size	46 inches
Resolution	1920 x 1080
Display Type	LED
Display Technology	LED
Refresh Rate	60Hz
HDMI Ports	3
USB Ports	1
Audio Output	20W
Smart TV	No
Built-in Wi-Fi	No
Energy Star Certified	Yes

Related product manuals

Preview: Insignia NS-46E340A13

Insignia NS-46E340A13

Preview: Insignia NS-42E480A13

Insignia NS-42E480A13

Preview: Insignia NS-48D510NA17

Insignia NS-48D510NA17

Preview: Insignia NS-40D510NA19

Insignia NS-40D510NA19

Preview: Insignia NS-43D510NA21

Insignia NS-43D510NA21

Preview: Insignia NS-40D420NA16

Insignia NS-40D420NA16

Preview: Insignia NS-43D420NA20

Insignia NS-43D420NA20

Preview: Insignia NS-40D510NA15

Insignia NS-40D510NA15

Preview: Insignia NS-49D420NA18

Insignia NS-49D420NA18

Insignia NS-43D420NA18

Preview: Insignia NS-49DR420NA18

Insignia NS-49DR420NA18

Insignia Roku TV NS-43DR620NA18