24
NS-AC10PWH8/ NS-AC12PWH8
www.insigniaproducts.com
2 Move your air conditioner to a location where a suitable drain is
available or place a drain pan under the unit that is capable of holding
up to 1.3 pints (.6 liters) of water.
3 Remove the rubber plug from the drain outlet and insert a syphon
hose (not included) into the opening.
4 Syphon the water from your air conditioner.
5 After you have drained the water collection tank, replace the rubber
plug, making sure that the bolt is secure.
6 Place the air conditioner in the desired location, reconnect the exhaust
hose, then plug it in. When the air conditioner is restarted after being
drained, it automatically starts in COOL mode with a temperature
setting of 72°F.
Drain outlet
Filter case
The power cord length shown is
not to scale.
The plug is American standard.
NS-AC10PWH8_NS-AC12PWH8_16-0982_MAN_V1_ENG.fm Page 24 Friday, December 9, 2016 3:36 PM
To Next Page
Loading...
