26
NS-AC14PWH8
www.insigniaproducts.com
1 Unplug your air conditioner, then disconnect the exhaust hose from
the back.
2 Move your air conditioner to a location where a suitable drain is
available or place a drain pan under the unit that is capable of holding
up to 1.1 pints (.5 liters) of water.
3 Remove the rubber plug from the drain outlet.
4 After you have drained the water collection tank, replace the rubber
plug, making sure that the bolt is secure.
5 Place the air conditioner in the desired location, reconnect the exhaust
hose, then plug it in. When the air conditioner is restarted after being
drained, it automatically starts in COOL mode with a temperature
setting of 72°F.
Storing your air conditioner
If your air conditioner will not be used for an extended period of time, we
suggest that you prepare it for storage by doing the following:
1 Unplug your air conditioner.
2 Remove the rubber plug and drain the water collection tank
completely.
3 Reinstall the rubber plug.
NS-AC14PWH8_16-0836_MAN_V1_ENG.fm Page 26 Wednesday, December 14, 2016 8:51 AM
To Next Page
Loading...
