Insignia NS-BC115SS9 User Manual

10
www.insigniaproducts.com
8 Use a Phillips screwdriver to remove the hinge bolts, then remove the lower
hinge and the leveling foot.
9 Attach the lower hinge and leveling feet to the opposite sides of your cooler.
10 Replace the glass door, then reinstall the upper hinge. Make sure that you
align the door and check the tightness of the door gasket.
11 Adjust the leveling feet to level your cooler.
Hinge bolts
Lower hinge
Leveling foot
Leveling foot
Lower hinge
Hinge bolts
Axle sleeve
Hinge cover
Hinge bolts
Upper hinge
Axle sleeve
Rivet

Insignia NS-BC115SS9 Specifications

General

Brand	Insignia
Model	NS-BC115SS9
Category	Accessories
Language	English