13
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
Auto Defrosting
During the auto defrosting process, the compressor shuts down and the
frost melts naturally.
When either of the following happens, the process ends and the
compressor starts again:
• The inner temperature is above 41º F (5º C).
• Defrosting time is longer than 60 min.
The temperature fluctuation during the defrosting process is within 7.2º F
(4º C).
In addition, when the inner temperature setting is above 41º F (5º C), the
compressor shuts down every six hours. However, as soon as the sensor
detects the inner temperature is above 41º F (5ºC), the compressor starts
immediately. The temperature fluctuation during this period is within
1.8º F (1º C).
Maintaining your beer and beverage cooler
Your beer and beverage cooler is designed for year-round use with only
minimal cleaning and maintenance.
When you first receive it, wipe the case with a mild detergent and warm
water, then wipe dry with a dry cloth. Do this periodically to keep your
beer and beverage cooler looking new.
Cleaning the interior of your beer and beverage cooler:
1 Turn off the beer and beverage cooler and unplug it from the wall
outlet.
2 Remove all beer and beverages.
3 Wash the inside with a damp warm cloth soaked in a solution of one
quart of lukewarm water to two tablespoons of baking soda solution.
4 Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently.
5 Dry the interior and exterior with a soft cloth.
Caution
To prevent damage to the finish, do not use:
• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners.
To Next Page
Loading...
Need help?
General