7
2-Door Compact Refrigerator
www.insigniaproducts.com
Dimensions
Preparing to install your refrigerator
Before using your refrigerator
• Remove the exterior and interior packaging.
• Let the refrigerator stand upright for approximately four hours before
connecting it to power. This reduces the possibility of a malfunction in the
cooling system from improper handling during transportation.
• Clean the interior surface with a damp, warm cloth.
Finding a suitable location
• This refrigerator is designed to be free standing only, and should not be
recessed or built-in.
• Place your refrigerator on a floor that is strong enough to support the
refrigerator when it is fully loaded.
• Allow 5 in. (12.7 cm) of space between the back and sides of the refrigerator
and any surrounding walls. This allows for proper air ventilation. Adjust the
feet to keep the refrigerator level.
19.1 in. (48.5 cm)
37.4 in. (94.9 cm)
33.4 in. (84.8 cm)
20.5 in. (52 cm)
NS-CF30SS9_-C_20-0286_MAN_V4_EN.fm Page 7 Wednesday, June 3, 2020 3:22 PM
To Next Page
Loading...
