9
Insignia 3.1 Cubic Foot Compact Refrigerator
www.insigniaproducts.com
Setting the thermostat
1 The first time you turn the refrigerator on, adjust the thermostat to “7”
and run for at least two hours before putting food in.
2 After it is fully cooled, test it and adjust towards “4” to make it less cool,
to best suit your needs. The “4” setting should be appropriate for
home or office refrigerator use.
Notes
• Turning the thermostat “0” stops the cooling cycle but does
not shut off the power to the refrigerator.
• If the refrigerator. is unplugged or loses power, you must
wait three to five minutes before restarting it. If you
attempt to restart before this time delay, the refrigerator
will not start.
• Large amounts of food will lower the cooling efficiency of
the refrigerator..
• If you choose to change the thermostat setting, adjust it by
one increment at a time. Allow several hours for
temperature to stabilize between adjustments.
NS-CF31SS6_15-0264_MAN_V1_ENG.fm Page 9 Friday, March 13, 2015 8:45 AM
To Next Page
Loading...
