9
3.3 Cu. Ft. Compact Refrigerator
www.insigniaproducts.com
Setting the thermostat
Adjust the thermostat to set your refrigerator’s temperature from 32° to 50° F (0°
to 10° C).
1 Plug your refrigerator’s power cord into a grounded wall outlet. When your
refrigerator is plugged in and the door is open, the interior light turns on.
2 The first time you turn your refrigerator on, adjust the thermostat to MID and
let your refrigerator cool completely before putting food in.
3 Rotate the thermostat to adjust the temperature:
• OFF: Turns your refrigerator off
• MIN: Warmest temperature
• MID: Moderate temperature
• MAX: Coldest temperature
Reversing the door position
You can change the side that the door opens on from the right side (as shipped) to
the left side.
You will need: An 8 mm (5/16”) socket driver, Phillips screwdriver, and a putty knife
or flathead screwdriver
• Make sure that your refrigerator is unplugged and empty.
• Have someone available to assist you in the process.
• Keep all of the parts you remove to reuse them later.
1 Lay your refrigerator on its back to gain access to the base. You should rest
your refrigerator on soft foam packaging or similar material to avoid damage
to the cooling pipes on the back of your refrigerator.
2 Open your refrigerator door and remove all the shelves inside the door.
3 Remove the upper hinge cover with a putty knife or flathead screwdriver.
Notes:
• The recommended temperature setting is “MID.”
• While your refrigerator is energy efficient, it is more efficient at warmer
temperatures.
8 mm socket driver
Phillips screwdriver
Putty knife
Flathead screwdriver
OR
To Next Page
Loading...
Need help?
General
