10
www.insigniaproducts.com
Leveling your refrigerator
• Your refrigerator must be level in order to function correctly. If your
refrigerator isn’t leveled during installation, the door may not close or seal
correctly and cause cooling, frost, or moisture problems.
• To level your refrigerator, turn the leveling foot (front) clockwise to raise a side
of your refrigerator or turn it counter-clockwise to lower a side.
Reversing the door
You will need the following tools to reverse the door:
Note: Having someone push against the top of your refrigerator helps to take some weight off
the leveling foot and makes it easier to adjust.
CAUTION: If you lay your refrigerator on its back or side for any length of time, wait for six hours
after you stand it up again before you plug it in. Otherwise, you may cause damage.
Note: Illustrations are for reference only and may not reflect the actual configuration of your
refrigerator.
Raise
Lower
Leveling
foot
Door
Phillips screwdriver
Socket wrench (5/8 in.)
Putty knife or thin-blade
screw driver
Masking tape
To Next Page
Loading...
Need help?
General
