27
Insignia NS-DCC5SR09 5 MP Digital Camcorder with 2.4" LCD Monitor Standard Definition-Blue
www.insignia-products.com
3 Press T (up) or W (down) to select Default
Setting. The
Default Setting
menu opens.
4 Press T (up) or W (down) to select Yes. If you
want to cancel the restoration, select No.
5 Press OK to close the menu.
Transferring files to a PC
The PC you connect your camcorder to must
meet the following requirements:
•Windows
®
2000, Windows
®
XP, or Windows
Vista
®
operating system
•Pentium
®
III processor with 800 MHz or
above
• 256 MB of memory
• CD drive
• 1 GB free hard drive space
• Available USB port
• 16-bit color display
To transfer files to a PC:
1 Connect the mini-USB cable to the USB port
on your camcorder, then connect the other
end to a USB port on a PC. The red LED
lights when your camcorder is connected to
the PC, and your camcorder is in Mass
Storage mode.
2 Open My Computer, then double-click
Removable Disk\DCIM (if there is a memory
card in your camcorder) or DV(x:)\DCIM (if
there is not a memory card in your
camcorder.
The files on your camcorder are displayed.
From My Computer, you can read, delete,
move, and copy any movies, pictures, or
voice recordings on your camcorder.
Maintaining
• Avoid pressing hard on the camcorder body.
• Do not subject the LCD to impact because
the glass may break and fluid may leak from
your camcorder.
• When you store your camcorder for an
extended period or you are not going to use it
soon, remove the batteries. Leakage may
occur that will damage your camcorder.
Troubleshooting
Specifications
Problem Solution
The image on the LCD is not
clear.
Try switching between Normal and
Macro mode to adjust the focus.
Use Macro mode for objects within
7.8 inches. Use Normal for objects
over 7.8 inches away.
Picture not recording
correctly.
To record, adjust the focus, then
press the shutter button. A
“funnel” icon appears in the center
of the LCD. Hold your camcorder
steady until the “funnel”
disappears.
The flash is not working. Make sure that your camcorder is
not in Macro mode.
Make sure that the batteries are
not low.
When recording, zoom does
not work.
Make sure that the stabilization
feature is turned off. For more
information, see “Using motion
stabilization for movies” on
page 9.
Files on a memory card do
not display correctly when
“!” or the “funnel” icon
appear on the LCD.
The “!” indicates that the file
format is not supported by your
camcorder. The “funnel” icon
indicates that the file cannot be
displayed correctly.
Delete the files with incorrect file
formats.
We recommend that you format
the memory card before you use it,
and avoid placing files with
different formats in the same
folder.
Note
The LCD screen is manufactured using extremely
high-precision technology. This ensures that
99.99% of the pixels work correctly. Some pixels
(tiny dots of black, white, red, blue, or green) may
appear on the LCD screen. These dots are a
normal result of the manufacturing process and do
not affect the recording.
Image Sensor 5 mega pixel
Operation Modes • Movie Record
•Picture Record
•Voice Record
• MP3 Player
• Mass Storage Device
Lens F3.2 (f = 7.0mm)
Focus Range • Normal mode: 59 in. (150 cm) ~
infinite
• Macro mode: Center: 7.87 in.
(20 cm)
Digital Zoom 8×
Shutter Electronic
LCD monitor 2.4" LCD
Storage Media • Built-in 64 MB memory (part of
memory is used for Firmware code)
• SD card slot support
Image Resolution High: 3744 × 2808 (11M Pixels)
Standard: 2592 × 1944 (5M Pixels)
Low: 1600 × 1200 (2M Pixels)
To Next Page
Loading...
