Insignia NS-DPF10WA-09 User Manual

INSIGNIA
4
?h 9 S fh^l EN -T- ER t0 enter the Thumt >naii mode
: he thumbnail images appear on the screen.
Press ^ or ^ to highlight a picture then Dress
SLIDESHOW on the remote control. The SkfeL*
starts from the picture you selected.
6 Press HI ENTER to pause the slideshow, then
press HI ENTER again to resume the slideshow.
Copying pictures to internal memory
You can copy a single picture, multiple pictures, or all
pictures from an attached memory card to the- frame's
internal memory.
Notes
You cannot copy pictures from the internal
memory to an attached memory card and you
cannot copy pictures between attached
memory cards.
Because you cannot copy pictures back from
the frame to a memory card, the frame should
not be treated as your primary picture storage
method. Make sure that you have the pictures
stored elsewhere (such as a memory card).
If you want to copy pictures from the interna!
memory to an attached memory care, you car
use a USB cable to copy pictures between the
memory card, internal memory, and the
computer. ___ _
insignia
To copy selected pictures to internal
memory;
1 Press t) BACK until the Home screen opens.
Horn®
A A MM'.
t* H>*
ri
ti
6
nr!
mm
I4ri#4 1 * fll.'
fl
m.
INSIGNIA
2 Press 4 or ► to high I i ght the memory ca rd you want
to play from, then press HI ENTER, The Thumbnail
screen opens with the pictures displayed.
j* %w?t
T ISlrtll
'fjua.*8 '*•>;
M • f LM
insignia
Press -4 ► A ▼ to highlight each picture you wan?
to copy, then press ss (SELECT) to mark it, A check
mark appears in the up per-right corner of each
marked thumbnail. Mark as many pictures as you
want to copy.
19

Insignia NS-DPF10WA-09 Specifications

General

Brand	Insignia
Model	NS-DPF10WA-09
Category	Digital Photo Frame
Language	English