Insignia NS-DPF10WA-09 User Manual

INSIGNIA
4 P/8SS — (DEL COPY:. The Copy screen opens
5 Press A f !o hrghlight Copy Selected or Copy AJI
then press HI ENTER
6 P'£$s A T to highlight YES, Eher> press HI ENTER
again. The selected pictures are transferred to
Internal memory (12B MB),
Connecting your digital picture frame to
your computer
Pictures can be transferred to your digital picture frame
using your persona! computer., To connect to a computer
you need the supplied mini USB cable,
Mote
Tour digital picture frame may not work with all
versions of Microsoft Windows.
To connect your digital picture frame to
your computer:
With your digital picture frame turned off, plug the
small end of the USB cable into the small connector
on the frame, then plug the large USB connector into
ubb port on your computer.
INSIGNIA
“ — ' ,
2 Tum on your digital picture frame.
The computer recognizes the picture frame as a
drive and the following dialog Pox opens,
Note
When your digital picture frame is connected
to the computer with the USB cable, the large
USB slot cannot be used at the same time.
21

Insignia NS-DPF10WA-09 Specifications

General

Brand	Insignia
Model	NS-DPF10WA-09
Category	Digital Photo Frame
Language	English