23
www.insigniaproducts.com
Setting viewing options
You can change all of the viewing options in the Setup menu
using the buttons on the top of the frame or on the remote
control. You can display the Setup menu at any time by
pressing MENU. Only the available setup options are
displayed for each menu.
To set viewing options:
1
Press (BACK) repeatedly until the Home screen
opens.
2 Press the arrow buttons to highlight the SETUP icon,
then press ENTER. The Setup menu opens.
3 Press or to highlight a display option, then press
ENTER to select the option. A second menu opens,
listing the available settings. A square icon ( ) to the
right of an option shows the current setting.
4 Press or to highlight a setting, then press ENTER
to select the setting.
5 When you are finished, press (BACK) to close the
Setup menu and return to the previous screen.
NS-DPF7G-DPF9G_10-0658_MAN_ENG_V5.fm Page 23 Tuesday, June 15, 2010 10:09 AM
To Next Page
Loading...
Need help?
General
