36
NS-DPF8WW-09
www.insignia-products.com
2 Place the other frame cover on the frame, then align
the IR sensor with the IR sensor hole on the frame
cover to ensure that the remote control will operate.
3 Install the two screws (supplied) into the screw holes
(1) to hold the frame cover in place. Please refer to
the illustration below:
Maintaining
Cleaning the LCD screen
Treat the LCD screen carefully. The screen is made of
glass and can be scratched or broken. To clean
fingerprints or dust from the LCD screen, we recommend
using the cloth provided (or a soft, non-abrasive cloth
such as a camera lens cloth) or an LCD cleaning kit.
Cleaning the digital picture frame
Clean the outer surface of the digital picture frame
(excluding the screen) with a soft cloth dampened with
water.
Caution
The front of the frame is made of glass. Use
caution when cleaning or replacing the frame
cover.
08-1410 NS-DPF8WW-09 - ENG.fm Page 36 Monday, July 7, 2008 4:24 PM
To Next Page
Loading...
Need help?
General
