Insignia NS-DWH1SS9 Installation Guide

www.insigniaproducts.com
14
Top Control Dishwasher
Step 6: Install the drain hose
1 Make sure that the leveling feet are loosened before standing the dishwasher upright. They may be tight from
shipping/packaging.
2 Turn the dishwasher upright.
3 Slide a screw-type hose clamp onto the right-angled end of the drain hose.
4 Install the drain hose to the dishwasher drain outlet on the back of the dishwasher, then tighten the screw-type hose
clamp.
You’ll need:
Drain hose installation hole
Back of dishwasher
Phillips screwdriver
Screw-type
hose clamps
Drain hose
NS-DWH2_BS8_SS8_NS-DWR2_BS8_WH8_SS8_17-0939_Install MAN_V5_ENG.fm Page 14 Wednesday, January 24, 2018 2:49 PM

Insignia NS-DWH1SS9 Specifications

General

Brand	Insignia
Model	NS-DWH1SS9
Category	Dishwasher
Language	English