15
NS-FWM27W1
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
1 Remove your washer from the packaging.
2 Make sure that the small, triangular piece of foam comes off with the
packaging base. If it doesn’t, lay your washer on its side, remove the foam,
then set your washer upright.
3 Remove the four transport bolts on the back of your washer.
4 Cover the holes with the transport hole plugs. Save the four bolts for future
use. You need them if you want to transport your washer to another location.
CAUTION:
If you do not remove the four bolts, your washer will make loud noise and vibrate
excessively or move. This can damage your washer.
To Next Page
Loading...
