Insignia NS-FWM27W1 - Cleaning the Drain Filter

OPERATING INSTRUCTIONS
42
www.insigniaproducts.com
Cleaning the drain filter
1 Use a flat blade screwdriver to open the filter door located on the bottom right
of the front of your washer.
2 Rotate the cap 90° clockwise, then pull the emergency drain hose out and
remove the hose cap.
CAUTION:
Clean the filters frequently. Blocked filters may:
• Keep your washer from draining water
• Keep your washer from spinning
• Cause loud or unusual noises from object caught in the filters
Filter door
Emergency drain hose cover