41
NS-FWM27W1
www.insigniaproducts.com
OPERATING INSTRUCTIONS
Cleaning the inlet filters
If water flows too slowly or not at all, you need to clean the inlet filter.
Machine filter
1 Turn off the water faucets.
2 Unscrew the inlet pipe on the back of your washer from the tap.
3 Pull out the filter with long nose pliers.
4 Use water to wash the filter.
5 Reinstall the filter, then reconnect the inlet pipe.
6 Turn on the water faucets and make sure there is no water leakage.
To Next Page
Loading...
