19
NS-FWM27W1
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
Installing in an alcove or closet
Minimum clearances between your washer and adjacent walls or other surfaces
are:
• Either side: 1 in. (2.5 cm)
• Rear: 1 in. (2.5 cm)
• Closet Front: 2 in. (5.1 cm)
• Top : 2 in. (5 cm)
If you install your washer and dryer side-by-side in a closet, the closet front must
have an unobstructed air opening of at least 72 sq. in. (465 sq. cm).
23.5 in. (59.5 cm)
1 in. (2.5 cm) 1 in. (2.5 cm) 2 in. (5.1 cm)
25.6in. (65 cm)
2 in. (5 cm)
1 in. (2.5 cm)
To Next Page
Loading...
