25
NS-FWM27W1
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
In a floor standpipe
• Place the drain hose into the standing floor standpipe. You can use nylon ties
(not included) to attach the drain hose to the standpipe.
Note: For a floor standpipe, the capacity must be at least 17 gal. (64 L) per minute.
The top of the standpipe must be between 2 ft. (60 cm) and 3.3 ft. (100 cm) from the
bottom of your washer.
3.3 ft. (100 cm) max.
2 ft. (60 cm) min.
Floor standpipe
To Next Page
Loading...
