EasyManua.ls Logo

Insignia NS-FWM27W1 - Grounding Requirements

Insignia NS-FWM27W1
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
NS-FWM27W1
www.insigniaproducts.com
SAFETY & PRECAUTIONS
11 Before the appliance is removed from service or discarded, remove the door
and cut off the power cord.
12 Do not reach into the appliance if the tub or agitator is moving.
13 Do not install or store this appliance where it will be exposed to the weather.
14 Do not tamper with controls.
15 Do not repair or replace any part of the appliance or attempt any servicing
unless specifically recommended in the user-maintenance instructions or in
published user-repair instructions that you understand and have the skills to
carry out.
16 Make sure that all pockets are emptied. Sharp and rigid items such as coin,
brooch, nail, screw or stone etc. may cause serious damages to this machine.
17 Pull out its plug and cut off the water supply after the operation.
18 Make sure that the water inside the drum has been drained before opening its
door. Please do not open the door if there is any water visible,
19 Do not try to repair the machine by yourself. The machine may be damaged or
more troublesome repair work may be needed and even dangerous operation
may take place if it is repaired by any inexperienced or unqualified staff.
20 If the plug (power cord) is damaged, it shall be replaced by the manufacturer
or a service agent to avoid any danger.
21 Take care that power voltage and frequency shall be identical to those of
washing machine.
22 Do not use any socket with rated current less than that of the washing
machine. Never pull out a power plug with a wet hand.
23 To ensure your safety, the power cord plug must be inserted into an grounded
three-pole socket. Check carefully and make sure that your socket is properly
and reliably grounded.
24 This washing machine should only be repaired and serviced by qualified
technicians.
25 If connected to a circuit protected by fuses, use time-delay fuses with this
appliance.
Grounding
This appliance must be grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electric shock by providing a
path of least resistance for the electric current. This appliance is equipped with
a cord that has an equipment grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment grounding conductor can
result in electric shock. Connect to an individual branch circuit. Check with a
qualified electrician or serviceman if you are in doubt as to whether the
washer is properly grounded.
DO NOT modify the plug provided with the appliance if it will not fit the outlet.
Please have a proper outlet installed by a proper outlet installed by a qualified
electrician.

Related product manuals